Wd 2Go App Manual For Instructions

I only discovered doing this by looking at threads in other forums. My device now works perfectly and I have other machines that use internally 443 and 80 but there is no conflict as I have the external ports addressesd through NAT.

You need to configure your WD device and network correctly, which includes.

Wait a few minutes, and you should receive the e-mail (assuming, of course, your spam filters dont kill it.).

If needed, change to another page in the UI and come back to force a refresh.

But if it is using RELAY mode, just be aware that this requires all of your connections to pass through WDs serversa less than optimal and untestable situation.

By default, the Cloud will have ports 80 and 443 already entered in the blanks.

They can be any arbitrary ports, with a few exceptions, between 1024 and 65535.

Also, consult your routers documentation to determine which ports are available and unused.

Wd 2Go App Manual For Instructions

Again, consult your routers manual for instructions on how this is done.

Once everything is back up, go back to Step 2 and check the connection status again.

If you are still unable to reach the NAS via remote access apps when not on your home network, then try this.

I dont someone reading this guide to try it and accidentally connect to someone and get confused.

That number after the colon must exactly match the External Port 1 port you chose in Step 4.

If your router is using UPnP, and you didnt do Step 4, then consult your routers documentation to determine how to see what port was given by the router to the My Cloud NAS.).

The Cloud doesnt allow actual web browsing using an external source, so if you see this error, it means you ARE able to reach the NAS via your configuration.

Try going back to Step 4 and using a different port for the one that doesnt work.

Start back at Step 1 and verify all settings are exactly correct.

Relay has lots of dependencies on WDs infrastructure thats completely avoided if you have port forwarding working.

As said, with only portforwarding ability working this seems useless as any USB external or not clouded NAS will do the same job.

Every day I lose my 3G connectivity because it keeps changing to relay mode.

I have to keep turning cloud access off and on and it works again.

Is the new firmware causing this My ports are all forwarded fine.

They must have different ports on the outside so the router knows which NAS is which.

I only discovered doing this by looking at threads in other forums.

My device now works perfectly and I have other machines that use internally 443 and 80 but there is no conflict as I have the external ports addressesd through NAT.

Wd 2Go App For Mac